How Long Can You Store Water in a Well?

If you are in a rural area and have a well then it is most likely that you are asking yourself “How long can you store water in a well”. In fact the answer to this question will depend on what type of well you have.

The first thing you need to know about a well is what material it is made from. A well is not just a hole dug in the ground, it is a very elaborate system that involves the drilling of several holes to obtain the water.

If you have a well then it is usually made up of a metal pipe system that contains a pump that draws the water through the water lines into your house. You can buy water from a well but sometimes the water is salty, sometimes it is clean, and sometimes you can even find water that is used for agricultural purposes.

If your well is older then you will notice that some of the water in it is brownish. This is because the water has been sitting there for a while and that the calcium that is in the water has dissolved. However this does not mean that you cannot store water in it.

It is very important to note that saltwater should not be stored in well water. When you do so, you are actually adding salt to your water that could potentially destroy your pump and piping system.

As far as how long you can store water in a well it really depends on the size of the well. If the well is relatively small then storing water in the well could last a few years.

Related post:  How to Prepare For the Worst Times - Things to Be Aware Of

However if you have a large area then you may have to store water for quite some time. This is because a large area of water might have to be stored in a big storage tank, and this could mean that the pump and piping would be needed as well. In this case it is very important to have an expert look at the well when it is in the middle of winter or if the pump is not working correctly.

The answer to the question “How long can you store water in a well” really depends on what type of well you have. However there is one thing that you should know.

Well water that is stored for a long period of time is often times very dirty, and this means that the water itself is full of impurities that could actually be damaging to the pump and piping system. If you want to keep your pump and piping system working efficiently then you are going to need to make sure that you are not storing dirty well water.

When you are storing water that is dirty or if you are not keeping it clean, you are actually adding contaminants to the water that could damage the pump and piping. Some of these impurities may include rust, copper and other metals, calcium, and even salt.

The best way to keep your pump and piping system from being damaged by these impurities is to simply drain the water down into a drainage hole and then take out as much of the water as you can before putting it back into the well. This way you are ensuring that the water is free of contaminants.

Related post:  Preparing 101 For Disaster

Another reason why it is important to keep your well clean is because many times the water will be contaminated with bacteria and rust. The bacteria can cause harm to the pump and piping so it is also important to drain the water and the pump completely before putting it back into the well.

If you cannot drain the water from the well then you might want to consider buying a storage pump for it to ensure that you have clean water all year round. There are several types of pumps available that have a tank where the water is stored.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts